Coupling ERGAL feets "mirrored"

We present our second model of coupling feets, in addition to the bronze model, we produce this ERGAL alloy version. ERGAL 7075 is an aluminum alloy, mainly used in the aeronautical buildngs, in particular in the structural parts. The shape of the feet is identical to the bronze feet. The weight, obviously, is lower: an ERGAL feet weighs 140 grams, vs 400 gr af the bronze feet. This ERGAL feets are available with natural mirror polished surface. 

The feets have a overall diameter of 45 mm, a 100 mm height and a weight of 135 gr.  On the bottom face there is a O-RING for better interface with the support. The feets have a fixing hole of 4 mm, but if you need the 6 mm hole is available on request. Stainless fixing screws are provided when you buy the Ergal feet kit. 

These feets are standard supplied with  our line of step-up transformers, except for the top model ( triple gain 99.99 Ag), where the coupling bronze feet is supplied. In all those situations where coupling interfacing is the best solution, (devices that generate vibrations and that must be conveyed externally, from the devices, to the support ) our coupling feets will give you much better results than the classic spyke avilable on the market, by virtue of their mass and their shape .


 Coupling ERGAL feets KIT ( number four pieces) including stainless steel fixing screw and beautiful laser cutting plywood box: 170 euro  plus shipping